Blog dell'azienda 32-bit Microcontroller STM32L496VGY6PTR: 80 MHz Ultra-Low-Power Cortex-M4 MCU, Empowering Industrial and IoT Embedded Designs

Mingjiada Supplies the STM32L496VGY6PTR—Specializing in STMicroelectronics’ STM32L4 Series MCUs, Providing One-Stop Procurement Services for Ultra-Low-Power, High-Performance Embedded Solutions

I. Product Overview: Flagship Ultra-Low-Power MCU

Leveraging nearly three decades of experience in electronic component distribution and a global supply chain network, Shenzhen Mingjiada Electronics Co., Ltd. specializes in supplying the ST (STMicroelectronics) STM32L496VGY6PTR microcontroller. This device is a key member of the STM32L4 series’ ultra-low-power product line. Based on a high-performance Arm® Cortex®-M4 32-bit RISC core operating at up to 80 MHz, it integrates a single-precision FPU (floating-point unit) and a complete DSP instruction set, achieving an excellent balance between ultra-low power consumption and computational performance.

The STM32L496VGY6PTR is housed in a 100-pin WLCSP package (4.62 x 4.14 mm) and features 1 MB of Flash and 320 KB of SRAM. It supports a wide range of peripherals, including USB OTG, LCD drivers, DFSDM (digital filter sigma-delta modulator), and other rich peripherals. It is specifically designed for applications such as industrial control, smart IoT, medical devices, and wearables that demand both low power consumption and high performance.

II. Key Technical Specifications

Core: Arm® Cortex®-M4 32-bit with FPU

Clock Speed: Up to 80 MHz

Flash Capacity: 1 MB (dual-bank, supports simultaneous read-write operations)

SRAM Capacity: 320 KB (includes 64 KB of hardware parity checking)

Operating Voltage: 1.71V – 3.6V

Operating Temperature: -40°C to +85°C

Package: WLCSP-100 (4.62 × 4.14 × 0.6 mm, 0.4 mm pin pitch)

Number of I/Os: 83 high-speed I/Os, most of which support 5V tolerance

III. Ultra-Low Power Features: Industry-Leading Energy Efficiency

The STM32L496VGY6PTR incorporates STMicroelectronics’ FlexPowerControl ultra-low power technology, providing multi-level power optimization ranging from deep sleep to active modes:

Shutdown mode: 25 nA 5 wake-up pins

Standby Mode: 108 nA 5 wake-up pins

Standby + RTC: 426 nA Real-time clock remains active

Stop 2 Mode: 2.57 µA Fast wake-up

Run Mode (LDO): 91 µA/MHz Balance between performance and power consumption

Run Mode (SMPS): 37 µA/MHz Ultimate energy efficiency (@3.3V)

This MCU achieved outstanding results in the ULPMark™ energy efficiency benchmark, with a CP score of 279 and a PP score of 80.2. Additionally, it takes only 5 µs to wake up from Stop mode, ensuring the system can flexibly switch between low power consumption and fast response.

IV. Extensive Peripherals and Connectivity Capabilities

1. Advanced Analog Peripherals

3× 12-bit ADCs (up to 5 Msps sampling rate, supporting hardware oversampling to 16 bits)

2× 12-bit DACs (including low-power sample-and-hold functionality)

2× Operational amplifiers (with built-in programmable gain amplifier (PGA))

2× Ultra-low-power comparators

2. Communication Interfaces (20 in total)

USB OTG 2.0 Full-Speed (supports LPM and BCD)

5× U(S)ART (including 1 LPUART) + ISO 7816/LIN/IrDA/modem support

4× I²C (FM+ 1 Mbit/s, SMBus/PMBus)

3× SPI + 1× Quad SPI (dual flash memory interfaces)

2× CAN (2.0B Active)

2× SAI (Serial Audio Interface)

SDMMC, SWPMI single-wire protocol master interface

3. Display and Graphics Acceleration

LCD Controller: Supports 8×40 or 4×44-segment displays, with built-in boost converter

Chrom-ART Accelerator™ (DMA2D): Dedicated graphics content acceleration engine

Camera Interface: 8–14 bits, up to 32 MHz (monochrome) / 10 MHz (color)

4. Timers and PWM

2× 16-bit advanced motor control timers

2× 32-bit + 5× 16-bit general-purpose timers

2× low-power 16-bit timers (capable of operating in Stop mode)

2× watchdog and SysTick timers

V. Typical Application Scenarios

1. Industrial Automation and Sensors

320 KB SRAM + 1 MB Flash support complex control algorithms; a rich set of analog peripherals (ADC/DAC/op-amps/comparators) meets the requirements of industrial sensor signal chains; CAN interface supports industrial fieldbus communication.

2. Smart IoT and Wearable Devices

Ultra-low power consumption (nA-level standby, μA/MHz in operation) makes it ideal for battery-powered devices; the ultra-compact WLCSP package meets the requirements of compact product designs; and the LCD driver allows direct connection to segmented displays.

3. Medical Electronics and Portable Devices

A highly integrated analog front end (OPAMP + PGA + high-speed ADC) supports biosignal acquisition, while hardware security features (read protection, write protection, proprietary code read protection, and a firewall) ensure the security of medical data.

4. Smart Home and Human-Machine Interfaces

The Chrom-ART graphics accelerator enhances UI responsiveness, while capacitive sensing channels (up to 24 channels) support touch buttons and linear/rotary touch sensors; the LCD controller simplifies display solution integration.

VI. Core Product Advantages

Extremely Low Power Consumption: 25 nA shutdown, 37 μA/MHz in operation—an industry benchmark

Powerful Computing Capability: Cortex-M4 + FPU + DSP, 80 MHz clock speed, 273.55 Coremark

High Integration: 1 MB Flash + 320 KB SRAM + Rich Analog/Digital Peripherals

Ultra-Compact Package: WLCSP-100 (4.6 × 4.1 mm), Saving PCB Space

Industrial-Grade Wide Temperature Range: -40°C to +85°C, Suitable for Harsh Environments

Genuine Product Guarantee: Mingjiada Supplies 100% Genuine Factory Products

VII. Why Choose Mingjiada Electronics?

Established in 1996, Shenzhen Mingjiada Electronics Co., Ltd. is an industry-leading independent distributor of electronic components. We have long distributed over 500 internationally renowned semiconductor brands, including ST, Infineon, TI, NXP, Microchip, ADI, and Xilinx, with inventory covering over 2 million part numbers.

Core Advantages

Genuine Products: ISO 9001 and ISO 14001 certified, with strict supply chain quality control

Extensive Inventory: Full coverage of the STM32 series, supporting both small-batch samples and large-volume orders

Fast Delivery: Warehousing centers in Shenzhen and Hong Kong, with efficient logistics response

One-Stop Procurement: Full-range supply of MCUs, FPGAs, power devices, and sensors

VIII. Conclusion

With its ultra-low power consumption, high-performance Cortex-M4 processing capabilities, rich integrated peripherals, and ultra-compact package, the STM32L496VGY6PTR is an ideal embedded control solution for industrial control, the Internet of Things (IoT), and medical electronics. Mingjiada Electronics, with a focus on genuine products, extensive inventory, and professional service, ensures a reliable supply of high-quality STM32 microcontrollers for our customers.

Please feel free to contact us:

Phone: +86 13410018555

Email: sales@hkmjd.com

Website: https://www.integrated-ic.com

Address: Rooms 1239–1241, Building B, New Asia Guoli Tower, Zhenzhong Road, Futian District, Shenzhen