The power consumption of a single AI server cabinet is rising from the hundreds of kilowatts to the megawatts, and traditional 48V low-voltage power supply systems have nearly reached their physical limits in terms of efficiency, thermal management, and power density. Architectures combining 800V high-voltage direct current (HVDC) with a 48V intermediate bus are being rapidly adopted, and the combined penetration rate of SiC and GaN wide-bandgap devices in AI data center power supplies has approached 20%, with room for further growth still expanding rapidly. In this round of power architecture restructuring, Infineon’s CoolSiC™ MOSFETs—with their high-voltage withstand capability, low switching losses, and excellent thermal reliability—have become the top choice for AC-DC rectification and high-voltage DC-DC conversion in the front end of AI server power supplies.
As an authorized independent distributor with nearly three decades of experience in the electronic components sector, Shenzhen Mingjiada Electronics Co., Ltd. maintains a long-term stock of the full range of Infineon CoolSiC™ SiC MOSFETs for AI server applications, providing reliable component support for PSU design and mass production.
Infineon’s Key CoolSiC™ MOSFET Product Lines and Available Models for AI Servers
The Infineon CoolSiC™ SiC MOSFETs supplied by Mingjiada Electronics cover a complete product portfolio ranging from 650V to 1200V and from surface-mount to top-cooled packages. The key models are categorized below by voltage rating and application scenario.
750V CoolSiC™ MOSFET G2: The Mainstay Component for AI Server PSUs
The second-generation 750V CoolSiC™ MOSFET G2 is specifically optimized for server power supply units and high- and low-voltage DC-DC converters. Compared to the previous generation, it offers a 20%–35% improvement in the figure of merit, achieves 100% pass rate in avalanche testing, supports a maximum junction temperature of 200°C, and extends the negative gate drive voltage range to −7V to −11V, effectively countering parasitic conduction effects. This voltage rating is highly compatible with the PFC stage and high-voltage DC-DC stage of AI server PSUs, making it a key focus for Mingjiada’s inventory planning for AI server applications.
Mingjiada’s long-standing 750V G2 series covers three major packaging families, catering to different power ranges and assembly process requirements:
IMBG75R Series (PG-TO263-7 surface-mount) features a built-in independent drive source pin, which effectively reduces the impact of parasitic inductance on gate drive. It is suitable for automated SMT production lines and covers the totem-pole PFC and DC-DC stages of medium-power PSUs. Typical models include IMBG75R007M2H, IMBG75R011M2H, IMBG75R016M2H, IMBG75R020M2H, IMBG75R025M2H, and IMBG75R033M2H. Taking the IMBG75R007M2H as an example, its on-resistance is as low as approximately 7 mΩ, and its continuous drain current can reach 198 A at 25°C, making it suitable for high-current branches requiring extremely low on-resistance losses.
The IMDQ75R Series (PG-HDSOP-22 top-cooled Q-DPAK) features a top-cooled package designed specifically for compact, ultra-high-power-density applications. Models with low on-resistance can handle extremely high currents (4 mΩ-class models can reach 357 A), enabling a design that allows a single device to carry high currents and reduces the number of parallel devices required in 12 kW high-power AI server PSUs.
IMZA75R Series (PG-TO247-4 Through-Hole Package) features a 4-pin design with a Kelvin source terminal to eliminate parasitic inductance interference in high-current paths and facilitate heatsink installation; it is commonly used in high-voltage DC-DC conversion stages. With on-resistance values ranging from 7 mΩ to 60 mΩ, this series covers the full power range from totem-pole PFC to high-voltage DC-DC applications.
650V CoolSiC™ MOSFET G2: A Cost-Effective Choice for Totem-Pole PFC and Mid-Power PSUs
The 650V CoolSiC™ MOSFET is a proven choice for totem-pole PFC topologies in AI server PSUs. Infineon’s 650V G2 discrete devices were specifically developed for server SMPS applications. The G2 version significantly reduces output capacitance, enabling operation at higher frequencies in soft-switching topologies such as CLLC, DAB, and LLC. In 3 kW–12 kW server and AI PSUs, they achieve power densities of up to 100 W/in³ and full-load efficiencies of approximately 97.5%. A 650V CoolSiC™-based bridge-less totem-pole PFC evaluation board has achieved efficiencies approaching 99% and power densities exceeding 72 W/in³ in high-end servers and telecommunications systems.
Representative 650V G2 models supplied by Mingjiada include the IMT65R033M2H (TOLL package, 650V, typical on-resistance 33 mΩ, continuous drain current 68 A, power dissipation 312 W). This device serves as the core switching element in the DC-DC conversion stage of Infineon’s 24 kW SiC BBU reference design, achieving conversion efficiency exceeding 99% in bidirectional buck-boost conversion between the battery pack and the 800 V DC bus. Its 175°C junction temperature rating and .XT packaging technology ensure high reliability under voltage spikes and high dv/dt transients. For mid-power AI server PSU designs that require a balance between performance and cost, the 650V G2 series offers a system-level-validated SiC option.
1200V CoolSiC™ MOSFET G2: The Core of 800V HVDC and Three-Phase PSU High-Voltage Sides
As AI data centers evolve toward 800V HVDC architectures, 1200V SiC MOSFETs have become the mainstream choice for three-phase PSUs and high-voltage DC bus sides. Infineon’s 1200V CoolSiC™ MOSFET G2 features on-resistances ranging from 7 mΩ to 78 mΩ and a gate voltage range expanded to −10 V to +25 V. With switching losses reduced by approximately 30% compared to the previous generation, it is available in various packages—including TO-247-4, QDPAK (TSC), making them particularly suitable for titanium-grade AI server power supplies and 800V high-voltage DC architectures. In a 24kW SiC BBU reference design for AI data centers, the combination of 650V and 1200V SiC technologies achieved a power density of 450 W/in³ and an efficiency exceeding 99%, operating directly between the battery pack and the 800V DC bus.
Mingjiada’s lineup of 1200V CoolSiC™ MOSFETs includes the IMZ120R030M1H (TO-247-4, 1200V, on-resistance 30 mΩ, continuous drain current 56 A, power dissipation 227 W) and the IMZ120R060M1H (TO-247-4, 1200 V, on-resistance 60 mΩ, continuous drain current 36 A, power dissipation 150 W). Additionally, the lineup includes G2 series models such as IMBG120R008M2H, IMBG120R181M2H, IMCQ120R053M2H, among others, covering a wide range of 1200V node requirements in AI data center power supply chains—from PFC to high-voltage DC-DC converters, and from PSUs to BBUs.
400V CoolSiC™ MOSFET G2: A Compact Choice for Three-Level PFC Architectures
Targeting the three-level PFC topology widely used in AI server power supplies, Infineon has extended its CoolSiC™ technology to the 400V and 440V voltage ratings. The second-generation 400V CoolSiC™ MOSFETs deliver high power density and system efficiency in both two-level and three-level hard-switching and soft-switching topologies, primarily targeting power conversion applications such as AI server PSUs and switching power supplies. The representative model IMW40R011M2H features a TO-247-3 package, a 400V rating, and a continuous drain current of 104A. It is suitable for design scenarios—such as three-level PFC—that require precise matching of device voltage ratings and conduction losses.
Mingjiada Electronics’ Supply Assurance and Product Selection Support
Established in Shenzhen in 1996, Shenzhen Mingjiada Electronics Co., Ltd. is an authorized independent distributor of globally renowned electronic component brands. With branches in Hong Kong, Japan, Russia, Taiwan, and other locations, the company has obtained ISO 9001 and ISO 14001 certifications. Within the Infineon CoolSiC™ SiC MOSFET product line, Mingjiada offers stock availability for the 750V G2 (the full package family of IMBG75R/IMDQ75R/IMZA75R), 1200V G2 (IMZ120R, IMBG120R, etc.), as well as key 650V/400V G2 models, supporting the full lifecycle from R&D selection to mass production delivery.
For AI server power supply design teams currently adopting 800V HVDC architectures or upgrading to Titanium-rated PSUs, Mingjiada Electronics offers inventory inquiries, part number matching, and rapid delivery support for genuine CoolSiC™ MOSFETs. As SiC transitions from an “optional” component to a “fundamental requirement” for AI power supplies, a stable and traceable supply of devices, coupled with an accurate understanding of component selection for AI server applications, is crucial for shortening the cycle from design to mass production.
Contact Information
Company: Shenzhen Mingjiada Electronics Co., Ltd.
Address: Rooms 1239–1241, Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong Province
Mobile: +86 13410018555
Email: sales@hkmjd.com
Website: www.integrated-ic.com
Persona di contatto: Mr. Sales Manager
Telefono: 86-13410018555
Fax: 86-0755-83957753