Shenzhen Mingjiada Electronics Co., Ltd. offers the ADI TMCM-1290-EVAL evaluation board from stock. This board enables independent assessment of the TMCM-1290 motor controller/driver's characteristics.
Product Overview
The TMCM-1290-EVAL is an evaluation kit based on the TMCM-1290 module, primarily designed for assessing, testing, and validating the module's performance. The TMCM-1290 module itself is a highly integrated single-axis controller and driver specifically engineered for two-phase stepper motors. This evaluation board significantly reduces workload during the prototyping phase by providing extensive interfaces and configuration options.
Core control and drive functionality is implemented by the TMC5240 motion controller and motor driver. This chip supports advanced technologies including StealthChop2, SpreadCycle, StallGuard2, and CoolStep, enabling dynamic current control to ensure quiet, smooth, and efficient motor operation.
Core Features
The TMCM-1290-EVAL evaluation board integrates all advanced capabilities of the TMCM-1290 module, including:
High-performance motor drive: Supports two-phase bipolar stepper motors with coil currents up to 2.1A RMS (3A peak), operating within a supply voltage range of 12V to 31V DC
Multi-protocol communication: Integrated RS485 and SPI interfaces, optional UART, supporting TMCL™ and Modbus protocol stacks for seamless integration into existing control systems
Advanced motion control algorithms:
StealthChop2™: Enables silent, smooth stepper motor operation, reducing noise to one-tenth of conventional drives
SpreadCycle™: High-dynamic current control for high-speed operation scenarios
StallGuard2™: Sensorless stall detection and protection with real-time motor load monitoring
CoolStep™: Dynamic current adaptation delivering up to 75% energy savings and reduced heat generation
Integrated 8-point motion controller: Supports point-to-point positioning, velocity control, and acceleration/deceleration curve generation without external MCU intervention
Encoder interface: Integrated ABN incremental encoder interface supporting closed-loop position feedback and lost-step compensation
Extensive I/O resources: Provides analogue inputs, digital I/O, and reference voltage source switch inputs for external sensor and limit switch integration
Compact dimensions: Evaluation board size compatible with TMCM-1290 module (24mm × 20.5mm), facilitating integration into compact devices
Key Technical Specifications
Motor type: Two-phase bipolar stepper motor
Supply voltage: 12 VDC to 31 VDC (module supports: +4.5 VDC to +36 VDC)
Motor current: Up to 2.1 A RMS (peak 3 A)
Communication interfaces: SPI, RS485, UART (Optional)
Control Protocol: TMCL™ or Modbus protocol stack
Integrated Functions: Stepper motor driver + 8-point motion controller
Core Technologies: StealthChop2, SpreadCycle, StallGuard2, CoolStep
Physical Dimensions: Compact module (24 mm × 20.5 mm)
Evaluation Board Hardware Configuration
The TMCM-1290-EVAL evaluation board employs a standard design, providing comprehensive test interfaces:
Motor Connection Terminals: 4-pin, 3.5 mm pitch screw terminals supporting AWG 16-24 wire gauge with locking mechanism
Power Input Terminals: 2-pin, 5.08 mm pitch terminals supporting 12-31 V DC input with built-in reverse polarity protection
Communication Interfaces:
RS485: Standard 3-pin terminal (A, B, GND), supporting multi-point daisy-chain topology
SPI: 6-pin 2.54mm header (MOSI, MISO, SCK, CS, GND, +3.3V)
Encoder Interface: 6-pin 2.54mm header, supporting 5V/3.3V encoder power supply
Reference Switch Interface: 4-pin 2.54mm header (REFL, REFR, GND, +3.3V)
Status Indicators: Power (green), Fault (red), Communication (yellow)
Debugging Interface: Micro-USB port (connects to PC for TMCL-IDE operation)
As a professional electronic component supplier, Mingjiada Electronics guarantees the authenticity of the supplied ADI TMCM-1290-EVAL evaluation board. Enquiries and purchases are welcome!
Il tuo messaggio deve contenere da 20 a 3000 caratteri!
